Popular Posts

Saturday, August 3, 2013

Toys of yesteryear: How we made dolls, tops and toy guns






Toys of yesteryear: How we made dolls, tops and toy guns. 
By CS Wan

Today, as I watch my grandchildren play with their Barbie dolls and battery-operated trains, they bring back memories of the toys, my siblings and I used to play with when we were kids. 
In the early 1950s, we stayed in the Residential Area in Kuala Pilah and like most kids in the neighbourhood we usually made our own toys. The toys were fashioned from discarded materials, recycled items or sourced from plants that were found in our neighbourhood. 
I remember, my sisters used to play with dolls that were made from the remnant of fabric. They would roll two pieces of rectangular cloth and tie the two pieces of rolled cloth together with a thread to form a cross. The dresses for the dolls were then  fashioned from the remnant of  other fabric. 



While my sisters played with their dolls, my brother and I would play with our tops and toy guns. I remember our first top was made from an areca nut. The head of a nail was cut off with a pair of pliers and then the nail was hammered into the bottom end of an areca nut. Later, we learned how to make  more 'sophisticated' tops from the branch of a guava tree.



Other than tops, we also made toy guns from bamboo which we sourced from a hedge that ringed the teachers' quarters. Once the 'guns' were ready, a 'gun-fight' would ensue, with my sisters joining in the fun. Above the sound of boisterous shouts, laughter and pops, there came a more audible voice  from a nearby kitchen.

"Kena mata, baru tau." ( It'll get your eyes, then you'll know). 

Mother's  warning just fell on deaf ears,as we continued  on with our games.



Here is a brief instructions on how to construct the bamboo gun





Materials required

1. A hollow bamboo stem 
2. A solid bamboo stick
3. Berries ( buah cenarai) or newspaper

Instructions

1. Get a thin, hollow bamboo stem about 30cm long.
2. Get a solid bamboo stem  about 40cm long that can fit perfectly into the hole or get a solid bamboo rod and whittle it to the correct size.  
 3. Get a hollow bamboo about 10cm long and make a handle for the rod. Make sure the top end of the handle has a knot.
4. Place a berry ( buah cenarai) at one end of the hollow stem and with the top end of the handle, gently tap it in.



5.  With the end of the rod push the berry (buah cenarai) slightly into the hollow bamboo. Withdraw the rod slightky  and then give it a hard push.
The berry will come out at the other end of the hollow bamboo with a big ’pop’. 
6. If berries are not available, you can use old newspaper. Soak small pieces of the paper in water and then roll them into small balls.   

Hope to post another article on toys of yesteryear..
Until then thanks for visiting this blog.

5 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. I have enjoyed reading your post. It is well written. It looks like you spend a large amount of time and effort on your blog. I appreciate your effort. Please check out my site.
    toy gun

    ReplyDelete
    Replies
    1. Hi Jake,
      Thanks for visiting this blog. Appreciate your compliments. Will check out your site.

      Delete
  3. Thanks a lot for posting this. We used to make these guns while we were kids back in late 80's and early 90's, here in Kerala, India. I don't know where these berries have gone these days.. thanks again and brought back all those good memories.

    ReplyDelete
  4. Thank you for your interesting and informative blog. I have enjoyed reading it and appreciate the work you have put into it. Here is some relevant information for you to review .
    toy machine guns

    ReplyDelete